Best Fleetguard fuel filter for 6.7 Cummins

This post will discuss the best Fleetguard fuel filter for 6.7 Cummins. Using these filter teams as prescribed will increase your car’s performance and allow you to operate the car better.

If you use the fuel filter properly and service the car regularly, your car will be more usable and you will be able to manage the work better.

Here is a list of all the types of filters you can see from here and make a purchase of your choice.

List of the Best Fleetguard fuel filter for 6.7 Cummins:

NamePackDetails
Cummins Filtration Fleetguard FS43255 Fuel Filter + Water Separator Check Price
Cummins Filtration Fleetguard FS20089 WaterFuel Filter + Water Separator Check Price
Cummins Filtration Fleetguard FF63009 (Cummins 5303743) Fuel FilterFuel Filter Check Price
Dodge Ram 6.7L Cummins Diesel Fuel FilterFuel Filter + Water Separator Check Price
Fleetguard Separator FS1065Fuel Filter Check Price
Fleetguard LF3894Fuel Filter + Water Separator Check Price
AirDog Pre-FilterFuel Filter Check Price
Fleetguard Fuel Cartridge Filter FF5369WFuel Filter Check Price
Fleetguard FF2200, Fuel Filter, for Cummins ISX EngineFuel Filter Check Price
Fleetguard FF5488 Fuel Filter Check Price
Fleetguard Fuel Filter Secondary Part No: FF5776Fuel Filter Check Price
List of the Best Fleetguard fuel filter for 6.7 Cummins

Cummins Filtration Fleetguard FS43255

Fleetguard FS43255

Fleetguard FS43255 fuel filter is so effective that it can filter most debris from minute particles to large paint particles and even rust.

Amazon has received very good reviews of it. Sales are comparatively much better.

It will take you a very short time to install if you are very experienced, it may take you 15-20 minutes. And even if you are not an expert, you can setup it a lot but may take a little longer.

  • Service for RAM Trucks 2010 up with Cummins 6.7L engine
  • Physical Dimensions: Height (inch) : 5.53 ;O.D. (inch) : 4.22 ; I.D. (inch): 1.56
  • Replace: Cummins 4947561 Dodge 68065608AA

Check Price

Cummins Filtration Fleetguard FS20089 Water

The fuel filter is new to the market and is the most updated fuel filter on the market that allows you to properly filter your car’s fuel and express your car’s engine.

The quality of their fuel filter is very nice and they always dominate the quality. This is one of the best mid-range products on our list.

  • Fuel Separator For Dodge 68197867AA
  • 99.9 Emulsified
  • Free Water Separation
  • 1″D Class 2B Thread
  • 14 Thread/Inch – 5.504″H x 4.248″OD

Check Price

Cummins Filtration Fleetguard FF63009 (Cummins 5303743) Fuel Filter

Cummins Filtration helps to ventilate which reduces the cost of operating your equipment. Fuel filters use StrataPore and NanoNet technologies. This allows the fuel to be filtered properly.

This fule filter provides a complete line of fleetguard transmission filters and fluid analysis equipment.

  • NanoNet Hi Performance Filtration for Cummins B/L Series Engine
  • 2x Contaminant Holding Cap
  • Best Protection and Longer Fuel System Life (Pack of 6)

Check Price

Dodge Ram 6.7L Cummins Diesel Fuel Filter

Dodge Ram 6.7L fuel filter costs a lot more but compared to this filter you can afford it if your budget is low. If you can’t find a good fuel filter, this will be perfect for your car. This will increase your mileage a lot and keep engine performance normal.

This fuel filter is different from the analog and is designed for a diesel engine. Inside this fuel filter, advanced quality paper is used. This is a 6.7L Cummins fuel filter.

  • Original Italy Ahlstrom 3 layers filter paper
  • Made of synthetic fiber
  • Results in 99% higher efficiency at 4 micron
  • Higher filter rating than 5 or 10 micron filter,
  • Effectively separate oil and water
  • Protects your vehicle’s fuel system from contaminants, such as: dirt, rust, and paint particles;
  • The imported material from Italy has a filtration efficiency of 99%
  • 3 layers,results in higher dust holding capacity than ordinary 1-2 layers

Check Price

Fleetguard Separator FS1065

This fule filter under Fleetguard filter Products line offers the widest range of replacement filters for tractors, combines, ATV and heavy duty equipment.

  • Manufacturer ‏ : ‎ Cummins Filtration
  • Largest OD: 93.73 mm (3.69 in) Overall Height: 248.67 mm (9.79 in)

Check Price

Fleetguard LF3894

Each fuel filter depends on its own multiplication and its working capacity is much higher than that of any fule filter. It is built with a little more working capacity.

Check Price

AirDog Pre-Filter

Fuel filters filter all the fules properly and then send them to the engine and this will prolong the performance of your engine.

  • Filter retainers need to be removed from the base.
  • The retainers are only needed for Airdog filters.
  • AirDog Pre-Filter WS100
  • Fuel Filter FF100-2 Combo Pack

Check Price

Fleetguard Fuel Cartridge Filter FF5369W

The unique design makes it easy to filter the fule. If you can apply this filter to your transport then good performance can be expected in your car.

  • End 1 ID 16.76 mm (.66 in)
  • Overall OD 97.03 mm (3.82 in)
  • Overall Height 178.56 mm (7.03 in)
  • Replaces FF5278, FF5314, FF5315, FF5369
  • For Upgrade, use: FS1029W, FS19536
  • Volvo part number 85105574. Replaces Volvo 3099158

Check Price

Fleetguard FF2200, Fuel Filter, for Cummins ISX Engine

  • Largest Od 97 Mm (3.819 In)
  • Overall Height 228.19 Mm (8.984 In)
  • Compatible With Vehicle Type: Truck
  • Product Type:Fuel Filter

Check Price

Fleetguard FF5488

Fleetguard FF5488 Fuel Filter For Cummins 3959612, 98.7% Efficiency, 5-Micron Rating, 7/8-14 UNF-2B Thread Size, 6.92″H x 3.68″OD

  • Largest OD 93.47 mm (3.68 in)
  • Overall Height 175.77 mm (6.92 in)
  • Thread Size 7/8-14 UNF-2B
  • Cross to: Cummins 3959612

Check Price

Fleetguard Fuel Filter Secondary Part No: FF5776

Fleetguard Fuel Filter FF5776 fuel filter is so effective that it can filter most debris from minute particles to large paint particles and even rust.

Check Price

Conclusion

If you want to do well in the performance of the car, you have to determine a good fuel filter. You can determine the best-performing Fuel Filter. If you have read this post in a completely correct way, you will get the best Fuel Filter if you determine anyone from here. So it will be much better in your car performance.

AutoShopBuzz.com – If you want to know more about this, please comment below and let me know how you like our post.

7 simple ways to increase the power of the car, available to everyone

Not all of them are considered budgetary, but some car owners resort to such life hacks.

Updating the software is the first step towards making the cargo noticeably faster, become more powerful, or more fuel-efficient. In specialized technical centers, this service is relatively inexpensive – from three to five thousand rubles. On cars with a large engine capacity or a turbocharger, the service is more expensive – a competent “firmware” will cost seven to eight thousand rubles. It should be noted that all responsibility for the technical consequences of the flashing lies with the owner.

Master tuners usually pre-take a receipt that there can be no complaints against them. Legal chip tuning in Russia is done by few car brands, and before thinking about increasing power, you need to consult with a dealer about maintaining the warranty.

What kind of oil should be poured into the engine

Usually, timely service is sufficient for stable engine operation. But to add power, regular maintenance will not be enough. If chip tuning has already been carried out, then the oil recommended by the plant should be changed twice as often, because the characteristics of the engine and the load on it have changed.

It is better to move away from the factory service parameters and change the oil not every ten thousand kilometers, but more often – every three to five thousand kilometers. The constant presence of fresh oil in the engine will allow the car to operate in optimal conditions for longer.

Engine and fuel additives

fuel

The need to pour additional chemistry into the engine and the fuel tank has been arguing for several years in automotive forums. The main thing you need to know about additives in engine oil is that they are most often used on used cars, when not only the engine but also the car, in general, is worn out. Some of them allow you to slightly increase the compression, others reduce the friction of the pistons against the cylinder walls and partially reduce the likelihood of scoring.

But such additives are produced only by large companies and are not cheap – about six to nine thousand rubles. There is no point in buying cheaper antifriction compounds – they not only change the chemical properties of the fresh original oil, but also often negatively affect the engine’s ability to quickly spin up to maximum speed.

Fuel additives work in much the same way. Some consider them to be a means to remove contaminants in the fuel system, but the cleaning effect is mediocre and it is impossible to clean the gas tank with an additive. But it is possible to increase the octane number of the filled fuel. True, you need to remember that this is a one-time promotion – as soon as the fuel in the tank runs out, you will have to buy the additive again. Space acceleration after the additive is poured into the tank should not be expected, but the engine will run noticeably smoother.

Before using additives, and even more so on a new car, you should consult with any specialized authorized dealer or the hotline of the representative office of this car brand.

Flushing nozzles and replacing spark plugs

The first procedure is also necessary for everyday life if there are no guarantees that the fuel from your favorite gas station is the same as in Europe. Carbon deposits, which accumulate on the elements supplying fuel to the engine, not only reduce the engine thrust but also, getting into the cylinders, is deposited in the form of black soot and burning. If you do not follow this, then the overhaul of the fuel system and the engine is within easy reach. Regular flushing of the injectors guarantees an even supply of fuel and fuel consumption close to the factory.

Replacing spark plugs will not only help the engine run smoother but also behave more consistently under prolonged high loads. In addition, constant replacement of the spark plugs (for example, every 20-30 thousand kilometers or more often) will keep the ignition module in good working order – another expensive element.

Zero resistance filter

car engine, car radiator

The easier the car takes in air from the outside, the easier it is for the engine to “breathe”. Factory filter elements are packed in a plastic box, which serves as a kind of external protection against coarse dirt. Zero resistance filters, on the other hand, are installed without protective elements – this way more air enters the engine, but at the same time it is filtered worse.

Before installation in a regular place, the filter of zero resistance is impregnated with a special compound, the cost of which may exceed the cost of the filter element. Another danger of such filters is that if you do not regularly clean it with special chemicals, dirt and dust from the environment will get directly into the engine.

Speed ​​limiter

The power of most modern cars is limited by software for the sake of the environment. This is done on purpose so that the engine works only in the parameters set at the factory. If the power or responsiveness of the motor is not enough, during chip tuning, you can ask the technician to erase the software speed and rpm limits.

After that, the car will go noticeably faster and will respond to the gas pedal a little faster than usual. We remind you that such changes are carried out by car owners at their own peril and risk. No one will be held responsible for the consequences of the technique and behavior of the machine.

Alternator belt and timing belt replacement

The lower the load on the generator and the engine as a whole, the easier it is for the car to accelerate. This rule is known in any car service, therefore, before increasing the power, the masters must study the condition of the car.

The generator, the compressor of the climate system, and other elements take on some of the engine power through special drives and rollers, so before chip tuning, it is worthwhile to conduct a full inspection of the engine compartment. The generator and the timing mechanism are the first on the list for study since the failure of one of the elements threatens the complete loss of the engine.

For your own peace of mind, before the programmed increase in power, you can change both the timing belt and the generator belt. In addition, after chip tuning, the engine, transmission, and other components begin to work under a completely different load, which affects their resource. That is why they need to be checked and serviced more often.